How do I add a Cpu to a managed SQL sever in vcenter hosting the vcenter...
Does anyone know how to add cpus to a sql server which hosts the vcenter database EnvironmentvCenter serverSQL hosting the vCenter database If I shut down the SQL server to add cpus - I lose...
View ArticleRe: How do I add a Cpu to a managed SQL sever in vcenter hosting the vcenter...
HiLaunch a vsphere client directly to the host that you having the vCenter server VM and shutdown the VC and add CPU and power it ON.
View ArticleClik here to view.
Re: How do I add a Cpu to a managed SQL sever in vcenter hosting the vcenter...
And then once you have it back online again, migrate that old Windows-based vCenter to the vCenter Server Appliance and rejoice.
View ArticleRe: Enable Virtualisation for 64 bit
Thanks! I found several answers in that blog. Really usefull!
View ArticleClik here to view.
How to recover a datastore after a disk failure?
I have an Adaptec RAID 71605Q and 8 hdds: 4x 2TB in a raid5 array, and 4x 3TB in a raid10 array. (Two connections on the card, and two of those 4-into-1 cables; one cable per array, if that makes...
View ArticleCan I use nVidia Quadro P4000 in vSGA mode?
Hi everyone, So I recently installed ESXi Hypervisor 6.5 on a Dell EMC Server PowerEdge T440. We then procured an nVidia Quadro P4000. Upon scouring the forums and the internet, I do not see anywhere...
View ArticleRe: Can I use nVidia Quadro P4000 in vSGA mode?
That's a consumer card and therefore not supported so likely 'no'.
View ArticleRe: How to recover a datastore after a disk failure?
> Can mount: No (some extents missing)Did you ever expand that datastore by adding extents ? Really bad ideaAnyway - read my instructionsCreate a VMFS-Header-dump using an ESXi-Host in production |...
View ArticleRe: How to recover a datastore after a disk failure?
I never intentionally added an extent to that datastore. In my raid card bios (before starting esxi), I created two virtual drives (the raid5 drive and the raid10 drive). In esxi, I created two...
View ArticleClik here to view.
Re: How to recover a datastore after a disk failure?
> I've never had someone on these forums ask me to call them.Yes - as far as I know I am the only one that does that.But I am also the only one that will look into VMFS-corruption issues at all.But...
View ArticleSpan a Virtual Machine across two Physical Servers
How can I span a Virtual Machine across two physical servers? Each server is a Poweredge R230 with CPU(4 cores, 8 threads), 64GB RAM, a dual 10Gb/s PCIe Ethernet adapter. These two servers will be...
View ArticleClik here to view.
Re: Span a Virtual Machine across two Physical Servers
If you mean with "spanning" that a VM could allocate ressources from both servers than this is impossible with all 3 products. There is VMware FT which "mirrors" the VM in realtime to the other host,...
View ArticleAfter load image ...black display
Hi , Im New here. After load image from iso it was coming a black mirror ...Then on the display Shutting down firmware service ...Relocating modules and starting up the kernel. What is the problem ?
View ArticleRe: After load image ...black display
My hardware:Mainboard: MSI N3150I ECO Mainboard mit Intel Celeron N3150 CPU Gehäuse : Inter-Tech ITX-601 schwarz Speicher : Kingston 4GB DDR3L SO-DIMM 1600MHz SDD: 128GB SanDisk Z400s 2.5" (6.4cm)...
View ArticleClik here to view.
Re: After load image ...black display
ESXi does not support any of the hardware you have, especially the Celeron processor which is likely the direct cause. You need compatible hardware to run ESXi, not consumer hardware.
View ArticleRe: After load image ...black display
Can you Tell me a Alternative motherboard with the same size ? .importent is the Energy there ned
View ArticleClik here to view.
Re: After load image ...black display
I think Celeron CPUs may not support ESXI. ESXI is suitable for professional virtualization. Celeron CPUs should be used for laptops. We recommend Intel Xeon CPUs and Intel S2600CW motherboard.
View ArticleCan you change your ESXi root password using the UI on the host?
We have requirements to change passwords periodically. I understand that the root password, if ever lost, is not recoverable other than through re-installation of the hypervisor. However, all I'm...
View ArticleRe: Can you change your ESXi root password using the UI on the host?
Not sure if you still can but I have done it in the past using Host profiles.Don't think its possible just using the UI of an individual host but again ive not needed to for ages..!
View Article