Clik here to view.
Re: Network Adapter Detected
That means ESXi wasn't able to match a driver with a piece of hardware. What type of system are you trying to install ESXi on? Make and model, please.
View ArticleRe: Network Adapter Detected
You need to find Network controller model, go to BIOS and check Network controller model then check for VIB installable which you need to add in ESXI image to make it work.
View ArticleRe: Network Adapter Detected
Are you installing on a Dell machine. You might have to customize installer and embed nic driver in the esxi installer iso.
View ArticleRe: Network Adapter Detected
Check your NIC that listed in supported hardware for your ESXi version. If it is not listed, put a e1000 Intel NIC on the PCI slot. For most of the versions this NIC work.
View ArticleRe: Network Adapter Detected
Hi.The NIC is: Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30) Regards.
View ArticleRe: Network Adapter Detected
Hi.I use Asus N56 Notebook I7 16Gb RAMThe NIC is: Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30) Regards.
View ArticleRe: Network Adapter Detected
ESXi is not supported on any notebooks, and neither is that NIC.
View ArticleClik here to view.
Re: Network Adapter Detected
The driver is available in below link for this particular controller. My laptop has same controller and I tested it long time back successfully with ESXI 5.5. You need to customize esxi image adding...
View ArticleRe: Network Adapter Detected
How can I customize the iso imagine to adding the NIC driver? Can you send me the procedure?Regards.
View ArticleClik here to view.
Re: Network Adapter Detected
You can use ESXI image builder to customize images Install vSphere ESXi Image Builder and Prerequisite SoftwareAnother way is to use a customize script...
View ArticleClik here to view.
Send eMail alert from CIM sensors (IPMI)
Hello community, I have some problems to configurate mail alert by CIM sonsors.... for example, I can't configurate "Alarm Definition" for report problem with power supplies. I was disconected an a...
View ArticleClik here to view.
VMDK auf externe Platte kopieren mit ESCXI 4.1
Hallo,ich bin kein VM Ware Spezialist darum hätte ich bitte Hilfe benötigt. Ich habe einen älteren Server mit ESXI 4.1. Ich muss jetzt den Server mit neuen Platten neu installieren (bis 5.5 kann ich...
View ArticleRe: VMDK auf externe Platte kopieren mit ESCXI 4.1
Hallo Lautner ,Ich empfehle Ihnen für die Zukunft Ihre Frage auf English zu stellen, da dies die "Offizielle" Sprache des Forums ist. Ich bin aber nicht ganz sicher ob ich die Frage 100% verstehe.Aber...
View ArticleRe: VMDK auf externe Platte kopieren mit ESCXI 4.1
Danke für die Antwort,mein englisch ist leider zu schlecht um mich richtig auszudrücken. Kann ich auch ein Synology Nas nehmen das hätte ich bei mir?Es ist ein IBM System X3400 Server mit SAS Platten....
View ArticleClik here to view.
Re: VMDK auf externe Platte kopieren mit ESCXI 4.1
Hallo nochmals, dass ist absolut kein Problem.Es gibt auch einige Deutschsprechende Experts Also Synology NAS ist TOP! Ich habe es nur nicht empfohlen da diese meist teurer sind als QNAP.Hier die...
View ArticleRe: Vsphere 5.5 and Emulex OneConnect 10Gb NIC trouble
We had a similar issue in our condition a couple of times also. On a couple of hosts, the firmware and driver overhaul reduced this issue - A "network stress test" consisting of copying a larger VMDK...
View ArticleClik here to view.
Re: Send eMail alert from CIM sensors (IPMI)
Hello Enrique Are there any alerts which are working or is it only this specific alert which is failing? Thanks,MS
View ArticlevCPU assigmenment
I have a Server with 2 processor with 12 Cores, and one Virtual Installed with Windows Server 2008 R2 Enterprise Edition, Total available physical cores are 24, I want to aasign at lest 16 cores to...
View ArticleClik here to view.
Re: vCPU assigmenment
Hi BhagwanSinghJai I just created a vGuest on my end.So what you need to do is first the vGuest needs to be off, otherwise you can't change the CORES section.Then you select the amount of CPUs So you...
View ArticleClik here to view.
Re: Send eMail alert from CIM sensors (IPMI)
Hello msripada, Other alarms it's working, for example for network alarms or storage alarms, but for this case (power supply) not working... I can see the status of all power supply in hardware tab,...
View Article